LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Instrument Panel >> Left Lower Instrument Panel Trim >> Installation

Left Lower Instrument Panel Trim: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the deck lid release switch connector.
  2. Position the left lower instrument panel trim over the retaining slots and firmly push into place.
  3. Install the five screws to the left lower instrument panel trim.
  4. Connect the power mirror switch connector and position the bezel over the retaining slots and firmly snap into place.
  5. Position the left instrument panel end cover over the retaining slots and firmly snap into place (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL END CAP - INSTALLATION) .
scientia non olet · About LEMON Manuals