LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Instrument Panel >> Kick Shield >> Installation

Kick Shield: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Snap kick shield onto right lower instrument panel trim.
  2. Secure push nut through hole into HVAC unit.
  3. Pull on shield to insure engagement.
scientia non olet · About LEMON Manuals