LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Instrument Panel >> Instrument Panel Outboard Bezel >> Installation

Instrument Panel Outboard Bezel: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the power mirror switch into the outboard switch bezel and firmly snap into place. See Figure.
  2. Connect the wire connector.
  3. Position the instrument panel outboard switch bezel over retaining slots and firmly snap into place.
  4. Connect the battery negative remote cable.
scientia non olet · About LEMON Manuals