LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Instrument Panel >> Glove Box Latch >> Removal

Glove Box Latch: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open glove box.
  2. Push in on sides of glove box bin and lower door.
  3. Pivot glove box downward and disengage hinge hooks from instrument panel.
  4. Remove glove box.
  5. Remove the assembly screws.
  6. Disassemble the glove box.
  7. Separate the latch from the glove box assembly.
scientia non olet · About LEMON Manuals