LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Instrument Panel >> Glove Box Latch >> Installation

Glove Box Latch: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the latch onto the glove box assembly.
  2. Assemble the glove box.
  3. Install the assembly screws.
  4. Engage hinge hooks into instrument panel and pivot glove box upward.
  5. Push in sides of glove box bin and snap glove box assembly into instrument panel.
  6. Close glove box door.
scientia non olet · About LEMON Manuals