LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Hood >> Prop Rod >> Installation

Prop Rod: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not place prop-rod or substitute against outer hood panel, damage to exterior finish will result.
  1. Place prop-rod into position.
  2. Engage prop-rod from retainer attaching prop-rod to radiator closure panel.
  3. Remove temporary hood prop rod.
  4. Close hood.
scientia non olet · About LEMON Manuals