LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Exterior >> Battery Splash Shield >> Removal

Battery Splash Shield: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the three push-pin fasteners and remove the splash shield. See Fig 1.
Fig 1: Battery Splash Shield
GC0031407Courtesy of DAIMLERCHRYSLER CORP.
1 - SPLASH SHIELD
2 - PUSH-PIN FASTENERS