LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Door Rear >> Latch Striker >> Removal

Latch Striker: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark outline of door latch striker on C-pillar to aid installation.
  2. Remove screws attaching door latch striker to C-pillar. See Fig 1.
  3. Remove door latch striker from vehicle.
NOTE: Be sure to check for any shims between door latch striker and C-pillar. If any shims are found, they must be reinstalled with the new door latch striker to maintain proper door operation.
Fig 1: Rear Door Latch Striker
GC0031401Courtesy of DAIMLERCHRYSLER CORP.
1 - SHIM
2 - STRIKER
3 - QUARTER PANEL