LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Deck Lid/Hatch/Liftgate/Tailgate >> Hinge >> Removal

Deck Lid/Hatch/Liftgate/Tailgate: Hinge: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open decklid.
  2. Mark outline of hinge on quarter panel trough and inside of decklid to aid installation.
  3. Place a padded block between the deck panel and the decklid.
  4. Remove the gas prop-rod lock caps. See Figure.
  5. Remove prop-rod from mounting studs.
  6. Remove bolts attaching hinge to decklid.
  7. Place decklid against padded block and hold it steady.
  8. Remove bolts attaching hinge to quarter panel trough.
  9. Remove hinge from vehicle.
scientia non olet · About LEMON Manuals