LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Deck Lid/Hatch/Liftgate/Tailgate >> DECKLID >> Installation

Deck Lid/Hatch/Liftgate/Tailgate: DECKLID: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position decklid on vehicle.
  2. With aid of a helper, loosely install bolts attaching decklid to decklid hinge.
  3. Align marks made on decklid previously to decklid hinge.
  4. Tighten bolts attaching decklid to decklid hinge to 22.5 N.m (200 in. lbs.) torque.
  5. Connect all wire connectors to decklid latch and install wire harness to decklid.
  6. Verify fit of decklid to deck panel. Adjust as necessary.
scientia non olet · About LEMON Manuals