LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Deck Lid/Hatch/Liftgate/Tailgate >> DECKLID Latch >> Installation

DECKLID Latch: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position decklid latch on vehicle.
  2. Loosely install bolts attaching decklid latch to decklid.
  3. Tighten bolts to 12 N.m (106 in. lbs.) torque.
  4. Align decklid latch to marks made previously on decklid and tighten bolts.
  5. Connect wire connectors to remote release solenoid, if so equipped.
  6. Verify fit of decklid to deck panel and decklid latch operation. Adjust as necessary.
scientia non olet · About LEMON Manuals