LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Deck Lid/Hatch/Liftgate/Tailgate >> DECKLID Latch Striker >> Installation

DECKLID Latch Striker: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position striker in vehicle.
  2. Loosely install bolts attaching decklid latch striker to rear closure panel.
  3. Align decklid latch striker to marks made previously on rear closure panel.
  4. Tighten bolts to 12 N.m (106 in. lbs.) torque.
  5. Verify fit of decklid to deck panel and operation of decklid latch. Adjust as necessary.
scientia non olet · About LEMON Manuals