Specifications - Body Gap And Flush Measurements - Jr-41

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

INDEX

DESCRIPTION	FIGURE
BODY GAP AND FLUSH MEASUREMENTS	Fig 1.

Fig 1: Body Gap And Flush Measurements

Courtesy of DAIMLERCHRYSLER CORP.

	LOCATION	GAP	FLUSH
1	Fascia to Hood	6.0 Blending to 8.0 +/- 2.5 Parallel within 2.5	1.6 Under Flush +/- 2.5 Consistent within 2.5
2	Headlamp to Hood	8.0 +/- 2.5 Parallel within 2.0	7.0 Blending to 4.0 +/- 1.5
3	Hood to Fender	4.0 +/- 1.0 Parallel within 1.5	0.5 Under Flush +/- 1.5 Consistent within 1.5
4	Fender to Front Door	5.0 +/- 1.0 Parallel within 2.5	0.8 Over Flush +/- 1.5 Consistent within 2.0
5	Front and Rear Doors to Roof	6.0 +/- 1.5 Parallel within 2.0	Front Door 2.2 Over Flush +/- 2.0 Rear Door Flush +/- 2.0 Consistent within 1.5
6	Front Door to Rear Door	5.0 +/- 1.0 Parallel within 1.5	Flush +/- 1.5 Consistent within 2.0
7	Rear Door to Quarter Panel	4.5 +/- 1.0 Parallel within 1.5	Flush +/- 1.5 Consistent within 2.0
8	Fuel Filter Door to Quarter Panel	3.0 +/- 0.75 Uniform within 1.0	0.5 Under Flush +/- 1.0
9	Front and Rear Doors at Sill	6.0 +/- 1.5 Parallel within 2.0	Front Door 5.5 Under Flush Rear Door 6.5 Under Flush +/- 1.5 Consistent within 2.5
10	Deck Lid to Quarter Panel	4.5 +/- 1.0 Parallel within 1.0	Flush +/- 1.5 Consistent within 1.5
11	Tail Lamp to Deck Lid	4.9 +/- 1.5 LH & RH to be within 2.0	0.5 Over Flush to 0.5 Under Flush +/- 2.0
12	Fascia to Deck Lid	6.3 to 7.0 +/- 2.0 Parallel within 2.0	0.3 Under Flush to 0.3 Over Flush +/- 2.0 Consistent within 2.0
NOTE: NOTE: ALL MEASUREMENTS ARE IN mm