LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Adjustable Quarter Glass - Convertible (Jr-27) >> Installation

Adjustable Quarter Glass - Convertible (Jr-27): Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower quarter window module into position through opening in top of quarter panel.
  2. Install fasteners holding quarter window module to inner quarter panel.
  3. Connect wire connector to power window motor.
  4. Raise glass lift channel to full up position.
  5. Position quarter glass on quarter window module.
  6. Loosely install fasteners holding quarter glass to quarter window module.
  7. Lower and secure convertible top.
  8. Adjust quarter glass as necessary (Refer to BODY/ADJUSTABLE QUARTER GLASS - ADJUSTMENTS) .
  9. Install quarter trim panel.
scientia non olet · About LEMON Manuals