LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Speed Control - Except Coupe) >> Servo >> Removal

Section 81 (Speed Control - Except Coupe): Servo: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. See Fig 1.
    Fig 1: Negative Battery Cable
    GC0031239Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove 2 nuts attaching servo bracket to shock tower.
  3. Disconnect electrical connectors and vacuum hose.
  4. Remove two nuts attaching speed control cable and mounting bracket to servo.
  5. Pull cable away from servo to expose retaining clip and remove clip attaching cable to servo. See Fig 2.
  6. Remove servo mounting bracket.
Fig 2: Speed Control Cable And Bracket
GC0031240Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals