Instrument Panel
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate battery negative cable.
- Remove A-pillar trim.
1 - INSTRUMENT PANEL SPEAKER 2 - ELECTRICAL HARNESS CONNECTOR - Remove instrument panel top pad (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TOP PAD - REMOVAL) .
- Remove speaker screws.
- Disconnect wire harness connector from speaker.
- Remove speaker. See Fig 1.