LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Audio System - Except Coupe) >> Power Antenna - Export >> Installation

Power Antenna - Export: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push antenna up through grommet in quarter panel.
  2. Install mounting bolts to antenna. Tighten to 12 N.m (110 in. lbs.).
  3. Connect antenna cable.
  4. Connect electrical connector to antenna.
  5. Connect drain tube.
  6. Install ground strap (if equipped) and fastener. Tighten to 12 N.m (110 in. lbs.).
  7. Connect battery negative cable.
scientia non olet · About LEMON Manuals