LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (HVAC Systems - Except Coupe) >> Distribution >> Blower Motor >> Installation

Blower Motor: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the blower motor into the HVAC housing.
  2. Install the three screws that secure the blower motor to the HVAC housing. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Connect the wire harness connector to the blower motor.
  4. Install the instrument panel silencer onto the passenger side of the instrument panel. (Refer to INSTALLATION )
  5. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals