LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (HVAC Systems - Except Coupe) >> Distribution >> Air Outlets >> Installation >> Installation - Air Outlet

Installation - Air Outlet

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Only the right outboard air outlet can be removed individually for service replacement. The other instrument panel air outlets are part of the instrument cluster bezel and cannot be serviced separately.
  1. Position the air outlet onto the right outboard end of the instrument panel.
  2. Install the screws that secure the air outlet to the instrument panel. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Install the air outlet barrel into the air outlet by gently pushing the barrel into the outlet until it snaps firmly into position.
  4. Install the right instrument panel trim bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TRIM - INSTALLATION) .
scientia non olet · About LEMON Manuals