LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (HVAC Systems - Except Coupe) >> Controls >> Ambient Temperature Sensor >> Installation

Ambient Temperature Sensor: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the wire harness connector to the ambient temperature sensor.
  2. Position the ambient temperature sensor to the inside of the front bumper beam.
  3. Install the push pin that secures the temperature sensor to the bumper beam.
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals