LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Differential & Driveline - Except Coupe) >> Half Shaft >> Diagnosis And Testing >> HALFSHAFT Diagnosis >> Clunking Noise During Acceleration

Clunking Noise During Acceleration

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

This noise may be a result of one of the following conditions:

  1. A torn seal boot on the inner or outer joint of the halfshaft assembly.
  2. A loose or missing clamp on the inner or outer joint of the halfshaft assembly.
  3. A damaged or worn halfshaft C/V joint.
scientia non olet · About LEMON Manuals