Standard Procedure - Brake Fluid Level Checking
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Brake fluid level should be checked a minimum of twice a year.
Master cylinder reservoirs are marked, FULL and MIN, indicating the allowable brake fluid level range in the master cylinder brake fluid reservoir.
CAUTION:
Use only Mopar(R) brake fluid or an equivalent from a tightly sealed container. Brake fluid must conform to DOT 3 specifications. Do not use petroleum-based fluid because seal damage in the brake system will result.
Although there is a range, the preferred level is FULL. If necessary, adjust the brake fluid level, bringing it to the FULL mark on the side of the master cylinder brake fluid reservoir.