LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Mechanical Brake System - Base (Service Information) - Except Coupe) >> Disc Brake Caliper - Front >> Disassembly >> Disassembly - Caliper Guide Pin Bushings (Disc/Disc Brakes)

Disassembly - Caliper Guide Pin Bushings (Disc/Disc Brakes)

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Before disassembling the brake caliper, clean and inspect it. Refer to CLEANING - CALIPER  or INSPECTION - CALIPER .

  1. Using your fingers, collapse one side of the rubber guide pin bushing. Pull the guide pin bushing out the other side of the brake caliper mounting boss.
  2. Repeat this procedure on the remaining bushing.
scientia non olet · About LEMON Manuals