LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Mechanical Brake System - Base (Service Information) - Except Coupe) >> Brake Fluid Level Switch >> Installation

Brake Fluid Level Switch: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert brake fluid level switch into left side of brake fluid reservoir. Be sure switch is pushed in until retaining tabs lock it to brake fluid reservoir.
  2. Connect vehicle wiring harness connector to brake fluid level switch.
scientia non olet · About LEMON Manuals