LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Frame & Bumpers - Except Coupe) >> Front Tow Hook >> Installation

Front Tow Hook: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place tow in position.
  2. Install bolts. See Figure. Tighten to 55 to 115 N.m (55 to 85 ft. lbs.) torque.
  3. Remove safety stands and lower vehicle.
scientia non olet · About LEMON Manuals