LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Engine Cooling System - Except Coupe) >> Engine >> Engine Coolant Temperature Sensor >> Installation

Engine Coolant Temperature Sensor: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install ECT sensor. Torque sensor to 19 N.m (168 in. lbs.).
  2. Reconnect ECT sensor electrical sensor.
  3. Fill cooling system (Refer to COOLING/ENGINE - STANDARD PROCEDURE) .
scientia non olet · About LEMON Manuals