Removal - 2.0L/2.4L

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Drain cooling system (Refer to COOLING/ENGINE - STANDARD PROCEDURE) .
Raise vehicle on hoist.
Detach power cord plug from heater.
Loosen screw in center of heater. Remove heater assembly. See Fig 1.

Fig 1: Engine Block Heater

Courtesy of DAIMLERCHRYSLER CORP.

1 - BLOCK HEATER

2 - POWER CORD