LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Engine Cooling System - Except Coupe) >> Engine >> Coolant Recovery Container - 2.0L/2.4L >> Installation

Coolant Recovery Container - 2.0L/2.4L: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install container in mounting position and install attaching screws.
  2. Connect the overflow hose to the coolant outlet connector.
  3. Snap the washer hose into groove on coolant recovery container.
  4. Install the air conditioning receiver/dryer attaching screw.
  5. Install the power steering reservoir attaching screw.
  6. Fill cooling system (Refer to COOLING/ENGINE - STANDARD PROCEDURE) .
scientia non olet · About LEMON Manuals