LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Engine Cooling System - Except Coupe) >> Engine >> Coolant Pressure Container - 2.7L >> Removal

Coolant Pressure Container - 2.7L: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain coolant below the coolant pressure container level.
  2. Remove the power steering reservoir attaching screw.
  3. Remove the air conditioning receiver/dryer attaching screw.
  4. Unsnap washer hose from the bottle.
  5. Disconnect the hose from coolant outlet connector to the bottle.
  6. Remove pressure container attaching screws.
  7. Reposition pressure container and disconnect the heater hose at the container.
  8. Remove coolant pressure container.
scientia non olet · About LEMON Manuals