LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Engine Cooling System - Except Coupe) >> Engine >> Coolant Outlet Connector >> Installation >> 2.4L Engine

2.4L Engine

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean sealing surfaces. Inspect gaskets for tears and cuts. Replace as necessary.
  2. Install coolant outlet connector and tighten bolts to 12 N.m (105 in. lbs.). See Figure.
  3. Connect hoses at coolant outlet connector.
  4. Fill cooling system (Refer to COOLING/ENGINE - STANDARD PROCEDURE) .
scientia non olet · About LEMON Manuals