LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Engine Cooling System - Except Coupe) >> Accessory Drive >> Drive Belts >> Adjustments >> Adjustment - 2.7L Accessory Drive Belts >> Power Steering Pump Belt TENSIONING

Power Steering Pump Belt TENSIONING

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a 1/2" drive breaker bar into the square opening on the power steering pump bracket.
  2. Hold clockwise pressure on power steering pump bracket and tighten adjusting bolt.
  3. Verify proper belt tension (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - STANDARD PROCEDURE - CHECKING ACCESSORY DRIVE BELT TENSION - 2.7L) .
scientia non olet · About LEMON Manuals