LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Suspension System - Except Coupe) >> Rear Suspension >> Hub / Bearing >> Description

Hub / Bearing: Description

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

The hub and bearing is a combined rear wheel hub and wheel bearing unit. All vehicles are equipped with permanently lubricated and sealed for life rear hub and bearing assemblies. There is no periodic lubrication or maintenance recommended for these units.

The hub and bearing is mounted to the rear knuckle's spindle using a retaining nut. The tire and wheel assembly, and rear brake drum or disc attaches to the studs protruding from the hub flange with wheel mounting studs.

scientia non olet · About LEMON Manuals