LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Air Bag Restraint Systems - Except Coupe) >> Seat Belt Height Adjuster >> Removal

Seat Belt Height Adjuster: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove adjuster knob and turning loop cover.
  2. Remove bolt attaching turning loop to belt height adjuster.
  3. Remove upper B-pillar trim panel.
  4. Remove bolt attaching seat belt height adjuster to B-pillar.
  5. Remove seat belt height adjuster from vehicle.
scientia non olet · About LEMON Manuals