LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Air Bag Restraint Systems - Except Coupe) >> Seat Belt Height Adjuster >> Installation >> Notes

Seat Belt Height Adjuster: Installation: Notes

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place seat belt height adjuster into position.
  2. Install two bolts attaching seat belt height adjuster to B-pillar. Torque bolts to 40 +/- 8 N.m (29.5 +/- 6 ft. lbs.).
  3. Install upper B-pillar trim panel.
  4. Install the bolt attaching the turning loop to the height adjuster. Torque bolt to 40 +/- 8 N.m (29.5 +/- 6 ft. lbs.).
  5. Install turning loop cover and adjuster knob.
scientia non olet · About LEMON Manuals