LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Air Bag Restraint Systems - Except Coupe) >> Seat Belt Control Timer Module - Convertible Jr27 - Export >> Installation

Seat Belt Control Timer Module - Convertible Jr27 - Export: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the Seatbelt Control Timer Module (SCTM) into the vehicle.
  2. Install the two screws retaining the SCTM.
  3. Connect the electrical connector.
  4. Connect the battery negative remote cable.
  5. Adjust the drivers seat to its desired position.
scientia non olet · About LEMON Manuals