SCTM Conditions: Notes
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not disconnect or connect the SCTM while the battery is connected.
NOTE:
If the SCTM is required to be in the "Sleep" mode for testing, remove the 20 amp seat belt maxi-fuse in the Power Distribution Center (PDC) for one minute. This will allow the SCTM to time out. Reinstall the fuse after one minute to proceed with testing.