LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Air Bag Restraint Systems - Except Coupe) >> Seat Belt - Rear Outboard >> Installation

Seat Belt - Rear Outboard: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place retractor and belt into position.
  2. Install bolt attaching rear seat belt retractor to inner quarter panel. Torque bolt to 40 N.m (29.5 ft. lbs.).
  3. Route seat belt webbing and D-ring through upper trim panel. Install bolt attaching D-ring to quarter panel. Torque bolt to 40 N.m (29.5 ft. lbs.).
  4. Install upper quarter trim panel.
  5. Install bolt attaching seat belt anchor to floor pan. Torque bolt to 40 N.m (29.5 ft. lbs.).
  6. Install rear seat cushion.
scientia non olet · About LEMON Manuals