LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Air Bag Restraint Systems - Except Coupe) >> Seat Belt - Rear Inboard >> Removal

Seat Belt - Rear Inboard: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear seat cushion.
  2. Remove nut attaching seat belt to floor. See Fig 1.
    Fig 1: Seat Belt - Rear Inboard
    GC0032220Courtesy of DAIMLERCHRYSLER CORP.
    1 - RIGHT REAR SEAT BELT
    2 - LEFT REAR SEAT BELT
    3 - FLOOR PAN
    4 - REAR SEAT BACK
  3. Remove seat belt from vehicle.