LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Air Bag Restraint Systems - Except Coupe) >> Seat Belt - Rear Inboard >> Installation

Seat Belt - Rear Inboard: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place seat belt in position.
  2. Install nut attaching seat belt to floor. Tighten nut to 61 +/- 5 N.m (83 +/- 5 ft. lbs.) torque.
  3. Install rear seat cushion.
scientia non olet · About LEMON Manuals