LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Air Bag Restraint Systems - Except Coupe) >> Seat Belt & Retractor - Rear Center >> Removal

Seat Belt & Retractor - Rear Center: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the condition of the shoulder belt and lap belt. Replace any belt that is cut, frayed, torn, or damaged in any way. Also, replace the shoulder belt if the retractor is either damaged or inoperative.

  1. Remove the rear shelf trim panel. Refer to REMOVAL .
  2. Remove the nut attaching the center rear seat belt retractor to the rear shelf.
  3. Remove rear seat cushion.
  4. Remove nut attaching center rear seat belt anchor to floor pan.
  5. Remove the center rear seat belt retractor assembly from the vehicle.