LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Air Bag Restraint Systems - Except Coupe) >> Restraints >> Standard Procedure >> Standard Procedure - Service After An Airbag Deployment >> Seat Belt TENSIONERS

Seat Belt TENSIONERS

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

After an impact where the front airbags have been deployed due to a collision. the following MUST  be replaced:

All other seat belts should be closely inspected for cuts, tears, fraying, or damage in any way following any impact or airbag deployment. The other seat belts are to be replaced when visible damage is incurred. Make sure to inspect the tensioner connector for visible damage, and replace wiring if found.