LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Air Bag Restraint Systems - Except Coupe) >> Rear Seat Belt Buckle - Convertible Jr27 Only >> Installation

Rear Seat Belt Buckle - Convertible Jr27 Only: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position rear seat belt buckle assembly onto studs on floor pan.
  2. Install nuts holding rear seat belt buckle assembly to floor pan. Torque rear seat belt buckle assembly nuts to 60 N.m (44 ft. lbs.).
  3. Install rear seat cushion. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals