Occupant Restraint Controller: Removal
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative remote cable.
- Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.
- For a manual transmission, remove shifter knob and boot.
- For automatic transmission models, remove shifter knob and unsnap shift indicator bezel.
- Remove the four attaching screws to floor console.
- Remove parking brake lever. Refer to REMOVAL .
- Remove three mounting screws to ORC.
- Disconnect wire harness connectors and remove ORC.