LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Air Bag Restraint Systems - Except Coupe) >> Front Seat Belt Buckle - Convertible Jr27 Only >> Removal

Front Seat Belt Buckle - Convertible Jr27 Only: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The torque prevailing nut holding the front seat belt buckle to the seat adjuster is not reusable. Verify availability prior to proceeding.
  1. Move seat to the rear most position.
  2. Disconnect and isolate the battery negative cable.
  3. Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.
  4. Disconnect the electrical connectors to the seat belt buckle.
  5. Remove nut holding seat belt buckle to seat adjuster. Discard nut.
  6. Remove seat belt buckle from seat.
scientia non olet · About LEMON Manuals