Section 71 (Steering System - Except Coupe): Column: Column: Operation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Turning of the steering wheel is transferred through the steering column and intermediate shaft, to the power steering gear pinion shaft. The gear then moves the steering knuckles, steering the vehicle.
The steering column used on vehicles equipped with a manual transaxle has an anti-theft provision. With the key/lock cylinder turned to the LOCK position, and the key removed, the steering shaft (and steering wheel) cannot be turned more than 180 degrees from center before locking. Vehicles equipped with an automatic transaxle do not have this feature.