LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (2.7L DOHC Engine (Service Information) - Except Coupe) >> Valve Stem Seals >> Removal

Valve Stem Seals: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove valve spring. (Refer to ENGINE/CYLINDER HEAD/VALVE SPRINGS - REMOVAL) 
  2. Remove valve stem seal by using a valve seal tool. See Fig 1.
Fig 1: Valve Stem Seal-Removal
GC0015309Courtesy of DAIMLERCHRYSLER CORP.
1 - VALVE SEAL TOOL
2 - VALVE STEM
scientia non olet · About LEMON Manuals