Removal - Off Vehicle

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

With cylinder head removed, compress valve springs using a Special Tool C-3422-D, Valve Spring Compressor.
Remove valve retaining locks, valve spring retainers, valve springs and valve spring seat/stem seal assembly. See Fig 1.

Fig 1: VALVE, SPRING SEAT/SEAL, SPRING, RETAINER AND LOCKS

Courtesy of DAIMLERCHRYSLER CORP.

1 - VALVE KEEPER	7 - VALVE-EXHAUST
2 - SPRING RETAINER	8 - VALVE-INTAKE
3 - VALVE KEEPER	9 - CYLINDER HEAD
4 - VALVE SPRING-EXHAUST	10 - VALVE STEM SEAL
5 - SPRING RETAINER	11 - VALVE SPRING-INTAKE
6 - VALVE STEM SEAL