LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (2.7L DOHC Engine (Service Information) - Except Coupe) >> Structural Collar >> Installation

Structural Collar: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The collar must be tightened using this service procedure, as damage to transaxle case and/or oil pan may occur.
  1. Position structural collar on oil pan and transaxle. See Figure.
  2. Loosely install all bolts.
  3. Tighten the collar to oil pan bolts to 55 N.m (40 ft. lbs.).
  4. Tighten collar to transaxle bolts to 55 N.m (40 ft. lbs.).
  5. Lower vehicle.
scientia non olet · About LEMON Manuals