LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (2.7L DOHC Engine (Service Information) - Except Coupe) >> Piston & Connecting Rod >> Standard Procedure >> Standard Procedure - Fitting Pistons >> Piston Pins

Piston Pins

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

The pistons have been cast and machined to one size and weight. The piston and rod assemblies are matched to weigh the same for engine balance.

The piston pin is full floating and is held in place by lock rings. Do Not switch pistons with other rods  . Pistons and connecting rods are serviced as an assembly for balance.

scientia non olet · About LEMON Manuals