LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (2.7L DOHC Engine (Service Information) - Except Coupe) >> Oil Pump >> Assembly

Oil Pump: Assembly

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble pump using new parts as required.
  2. Tighten cover screws to 12 N.m (105 in. lbs.). See Figure.
  3. Tighten oil pressure relief valve retaining cap to 12 N.m (105 in. lbs.). See Figure.
  4. Prime oil pump before installation by filling rotor cavity with engine oil.
scientia non olet · About LEMON Manuals